[SAFETY_PROTOCOL]: USER_MAINTENANCE & SAFE_USE

[OBJECTIVE]: INCIDENT_PREVENTION

To ensure optimal performance and maintain the structural integrity of your CANDLES, all users must adhere to the following safety protocols. Failure to follow these guidelines may result in system failure or fire hazard.

01. [PRE-IGNITION_CHECK]

TRIM: Always trim the wick to 5mm before every deployment. A long or "mushroomed" wick can cause an unstable, oversized flame and excessive smoke.
SURFACE STABILITY: Place all units on a stable, heat-resistant surface or a designated HOLDER. Never place directly on furniture or flammable materials.
CLEARANCE: Ensure a minimum 10cm clearance zone around the unit. Keep away from curtains, vents, and drafts.

02. [ACTIVE_MONITORING]

CONSTANT_SURVEILLANCE: Never leave an active flame unattended. If you leave the room, extinguish THE CANDLE.
EXTINGUISH_LIMITS: Discontinue use when only 10mm of wax remains in the base. Burning beyond this point may cause the holder or surface to overheat.
FLAME_AWARENESS: Due to our specialized hand-marbling process, you may experience a more active or larger flame than standard CANDLES. If the flame becomes too high or flickers excessively, extinguish immediately and re-trim the wick.

03. [POST-DEPLOYMENT]

HANDLING: Do not touch or move the CANDLE while active or while the wax is in a liquid state. The CANDLE AND HOLDER will remain high-temperature for a period after termination.
TERMINATION: Use a snuffer to extinguish the flame. Do not use water or blow forcefully, as this can cause hot wax to scatter.

04. [VULNERABLE_PROXIMITY]

Keep all units out of reach of children, pets, and CHILDREN.

[LEGAL_DISCLAIMER]:
ASTRO GLOW units are intended primarily for decorative purposes. The user assumes all responsibility for the safe operation of these products. ASTRO GLOW is not liable for any damage or injury resulting from improper use or failure to follow the [SAFETY_PROTOCOL].

[STATUS]: SYSTEM_SAFE